ZONADEPRUEBAS RETROINFORMÁTICA
Por favor Iniciar sesión o Registrarse.
La fecha y hora actual es lunes, 06 de mayo 2024, 11:20
Inicio  Buscar  Ayuda  Iniciar sesión  Registrarse  Miembros  Sala de chat

ZONADEPRUEBAS RETROINFORMÁTICA :: SISTEMAS CLÁSICOS :: VIDEOCONSOLAS :: Ayuda con una Videopac  :: Página 1 De 1
colossus
Moderador
Imagen
Imagen

Mensajes: 315
Ayuda con una Videopac (lunes, 19 de enero 2004, 19:21) Citar  
Buenas:

Acabo de conseguir una Philips Videopac+ G7400, pero no funciona. Al encenderla con el único cartucho que tengo (Nº 15, Samurai) la pantalla se queda en negro.

Como no tengo mucha idea de consolas necesito ayuda para identificar el problema. Si alguno tiene una Odyssey 2 o Videopac (aunque no sea 7400) que funcione, con un cartucho en el que haya que pulsar alguna tecla para empezar a jugar (en el mio hay que presionar el 1, 2, 3 ó 4) podrías decirme:

1) ¿Se queda la pantalla en negro si enciendes la cosola sin cartucho ni joysticks enchufados?

2) ¿Y si sólo conectáis los joysticks?

3) ¿Y si usáis el cartucho pero sin joysticks?

4) ¿Y si metéis también el cartucho pero no le dais a ninguna tecla?

Gracias de antemano.

Un saludo: Colossus

IP conectada Estado: desconectado Perfil 
Orden de las respuestas: última respuesta primero :: primera respuesta primero
Lurpak
Newbie
Imagen


Mensajes: 1
RE: Ayuda con una Videopac (lunes, 15 de marzo 2004, 06:45) Citar  
It might be worth picking up an old cartridge from ebay to test, im sure you would get it for under €2 especialy race (no 1)
do you hear any sound when power is on ?
when it initialises the 7400 fills the screen with a message like.

"Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start..Press 1 to start.."

it doesnt matter if joy sticks are in or not

Espan..http://babelfish.altavista.com/babelfish/tr

HTH

IP conectada Estado: desconectado Perfil 
colossus
Moderador
Imagen
Imagen

Mensajes: 315
RE: Ayuda con una Videopac (lunes, 15 de marzo 2004, 17:26) Citar  
Hi, Lurpak, and welcome to zonadepruebas:

The Videopac, when powered on, issues no sound and no message, only a black screen. I've tried two different cartridges, and it would seem very strange to me if both were damaged. Power board, keyboard and TV modulator are OK also... So I'm afraid there is a severe problem with the motherboard.

Thank you anyway for your interest and valuable information. Hope to hear from you in this forum again!

Regards: Colossus

IP conectada Estado: desconectado Perfil 

PBLang 4.59 © 2002-2003 by Martin Senftleben
Imagen